Instruments for determining mechanical and chemical properties
TA Instruments Q800 Dynamic Mechanical Analysis (DMA)
- Analysis of mechanical properties as a function of time, temperature and frequency.
- Can be used to analyze for example stiffness, elasticity and damping.
- Maximum force 18 N
- Temperature range -150 - 600 °C
30 - 80 °C with variable humidity 10 - 80 %
- Frequency range 0.01 - 200 Hz
Contact person Mika Lahelin / Laboratory of Polymer Technology
AMI-200 Characterization system
Contact person Riku Slioor / Laboratory of Industrial Chemistry
Veeco Dektak6M Stylus Profiler
- Step height and surface roughness measurements. Applicable for routine measurements of non-clean-room-compatible solid samples.
- Maximum sample thickness 31.75 mm
- Vertical range 262 μm
- Vertical resolution 1 Å at 65 kÅ range, 40 Å at 655 kÅ and 40 Å at 2620 kÅ
- Scan length range 50 μm to 30 mm
- Stylus tip 12.5 μm, changeable
- Stylus force 1 - 15 mg, programmable
- Color video camera with manual zoom optics 70-280X
Contact person Janne Halme / Energiatieteet
More information: www.tkk.fi/Units/AES/projects/renew/ 
Mechanical testing
- MTS 858 Table Top System: 0 - 100 N (± 0.05 N) tai 100 N - 1 kN (± 0.5 N).
- Furnace: Temperature range: -20° - +120°.
- Uniaxial: Tensile, Creep, Fatigue, Relaxation.
- Environmental, thermo-mechanical, etc. test methods for accelerated reliability testing available.
Contact person lab.eng. Pirjo Kontio / Elektroniikan valmistustekniikan laboratorio.
More information: www.ept.hut.fi/Facilities
SHORTCUTSFront pageWhat is UMK?UMK membersEquipment pool Selected recent publications UMK Colloquium on New MaterialsExecutive board |